Mud Motors
Mud Motors
The Downhole Drilling Motors provided by StraightLine® have been designed from the ground up for use in the HDD Industry. Maximum performance in HDD applications are best delivered by Slow Speed/High Torque motors with a rugged bearing sections designed to withstand the sideloads common to arced bore paths. Following are the key features found in our motors:
- HDD Power Section Designs - the displacement of our power sections were carefully matched to the mud pumps commonly found on major OEM directional drilling machines. It is this precise match that gives our motors exceptional HDD performance.
- Slow Speed - the motor operates at a speed more compatible with roller bits. This significantly lengthens bit life with increased on bottom time and fewer round trips.
- High Torque - more set down weight can be put on bit for faster penetration with reserve power for the hard spots.
- Oil Filled Bearing Section - pre-pressured and pressure compensated bearing section provides long seal life and more dependable bearing operation.
| Part Number | Description | Weight | Price | |
|---|---|---|---|---|
| 1801-101-01 | Mud Motor, 3"; 5/6; 2 3/8" Reg Pin (top)/2 3/8" Reg Box | 175 lbs. | $CALL | |
| 1801-101-02 | Mud Motor, 3"; 5/6; 2 3/8" Reg Pin (top)/2 3/8" Reg Box | 200 lbs. | $CALL | |
| 1801-101-03 | Mud Motor, 3-1/2"; 5/6; 2 7/8" Reg Pin (top)/2 7/8" Reg Box | 300 lbs. | $CALL | |
| 1801-101-04 | Mud Motor, 3-1/2"; 6/7; 2 7/8" Reg Pin (top)/2 7/8" Reg Box | 300 lbs. | $CALL | |
| 1801-101-05 | Mud Motor, 3 3/4"/4 1/4"; 5/6; 2 7/8" Reg Pin (top)/2 7/8" Reg Box | 450 lbs. | $CALL | |
| 1801-101-06 | Mud Motor, 3 3/4"/4 1/4"; 9/10; 2 7/8" Reg Pin (top)/2 7/8" Reg Box | 425 lbs. | $CALL | |
| 1801-101-07 | Mud Motor, 5"; 4/5; 3 1/2" Reg Pin (top)/3 1/2" Reg Box | 1200 lbs. | $CALL | |
| 1801-101-08 | Mud Motor, 5"; 7/8; 3 1/2" Reg Pin (top)/3 1/2" Reg Box | 1200 lbs. | $CALL |
