Reamers
Barrel Reamers
The Barrel Reamer
Click to Enlarge.
Full Diameter Compaction
Click to Enlarge.
Large Carbide Cutters
Click to Enlarge.
Carbide Hard Facing
Click to Enlarge.
Replaceable Fluid Ports
Click to Enlarge.
Helical Wear Bars
Click to Enlarge.
The barrel reamer has a relatively flat face lined with rows of carbide cutters that allow the tool to cut and open the hole slightly larger than the diameter of its solid body. The reamer's cutting teeth overcut the tool body, allowing the slurry to flow past the reamer. Key features are: full diameter compaction; fixed conical carbide cutters for maximum performance and tool life; critical wear areas feature carbide hardsurfacing; replaceable fluid ports; special wear bars with carbide hardsurfacing to protect fluid ports.
The Barrel Reamer is a very useful tool:
- Commonly used in bores where the formation types are relatively soft
- Acts as a stabilizer when pulling larger reamers, fly cutters, or hole openers
- Regularly used when installing final product
Shaft size: 3" – 5"
Size range: 12" – 30"
Prices shown are for pin, box or tang rear connection. To configure your reamer today, contact us or request a custom configuration quote.
| Description | Price | |
|---|---|---|
| 12" Barrel Back Reamer, 4-1/8" Shaft | $1499.00 | Quote |
| 14" Barrel Back Reamer, 4-1/8" Shaft | $1999.00 | Quote |
| 16" Barrel Back Reamer, 4-1/8" Shaft | $2499.00 | Quote |
| 18" Barrel Back Reamer, 4-1/8" Shaft | $2999.00 | Quote |
| 20" Barrel Back Reamer, 4-1/8" Shaft | $3499.00 | Quote |
| 24" Barrel Back Reamer, 4-1/8" Shaft | $3999.00 | Quote |
| 30" Barrel Back Reamer, 4-1/8" Shaft | $4499.00 | Quote |
