Locators

****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****

Financing

About Us

Support

Used Equipment

Employment

Legal

Subscriptions

Table of Contents

Locating and Tracking Equipment

Eclipse Package	Mark V Package	Mark III Package	Spot-D-Tek IV Package
Mark Series Trasmitters	DucTrak Transmitters	Eclipse Transmitters	Spot-D-Tek Transmitters
DigiTrak® locators are known for their ease of use and tracking accuracy!

Featured here are our most popular tracking system "packages"
and the complete line of DCI transmitters.

Authorized Dealer

Service Center

UPGRADES FROM ALL MAKES/MODELS

DigiTrak® Eclipse® System

Click here for OEM spec sheet.

Package includes remote receiver, remote display, battery charger, 4 battery packs, receiver carrying case, and remote carrying case.

Eclipse® Features

The Eclipse® system is revolutionary for the HDD industry. It is the first of its kind to display the drill head location and locate points in a "real-time" bird's-eye view.

Easiest system on the market to learn and operate
Dual frequency capable
Programmable target depth and remote steering functions
Advanced features such as tension monitoring and magnetic steering tool capabilities

DigiTrak® Mark V System

DCI Mark V locating package
Click here for OEM spec sheet.

Package includes remote receiver, remote display, battery charger, 3 battery packs, system carry case, remote display carry case.

Mark V Features

The dual frequency DigiTrak® Mark V utilizes the industry's lowest frequency for optimum rebar penetration. Advanced circuit design effectively combats active interference and increases pitch/roll speed and range.

Dual frequency receiver and transmitter
Effective interference rejection
Look-ahead® locating proves location, depth, pitch, and roll of transmitter in drill head (also battery and temperature status)
Smooth auto gain changes are transparent to the operator

DigiTrak® Mark III System

DCI Mark III locating package
Click here for OEM spec sheet.

Package includes remote receiver, remote display, battery charger, 3 battery packs, system carry case, remote display carry case.

Mark III Features

The DigiTrak® Mark III has set the standard in the HDD industry and is the most widely used receiver for drill head locating and guidance in the world.

Depth prediction firmware provides the locator with estimated depth at the front locate point
Robust, upgradeable design
Easy-to-learn locating technique that leads you to the transmitter or locate point
Simple one-button, single-hand operation
No ghosts or false
Left/right steering indicator allows remote steering from the drill rig
Fast data updates increase drilling efficiency
DataLog® and cable system compatible

DigiTrak® Transmitters

Mark Series Transmitters

Length x Diameter	Depth Range	Battery Type	Temp. Rating	Weight	MSRP*

DFT: Dual Frequency (1.5 / 33 kHz) For use with the Mark 5 System

15 in. x 1.25 in. 38 cm x 3.125 cm	45 ft 13.7m	2 C-cell alkaline 20 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$2,950

DS: Short Range (Blue) Mark 3/4 compatible.

8 in. x 1.00 in. 20 cm x 2.5 cm	15 ft 4.6 m	1AA-cell alkaline 12 hours awake 50 hours sleep	180°F 82°C	8.4 oz 240 g	$1,650

DT: Standard Range (Yellow) Mark 3/4/5 compatible.

15 in. x 1.25 in. 38 cm x 3.125 cm	40 ft 12.2 m	2 C-cell alkaline 30 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$1,650

DX: Long Range (Red) Mark 3/4/5 compatible.

15 in. x 1.25 in. 38 cm x 3.125 cm	70 ft 21.3 m	2 C-cell alkaline 20 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$2,750

D4X: DX with Extended Life (Red) Mark 3/4/5 compatible.

19 in. x 1.25 in. 38 cm x 3.125 cm	70 ft 21.3 m	4 C-cell alkaline 40 hours awake 400 hours sleep	220°F 104°C	1.4 lb 635 g	$2,750
DXP: Long Range with 0.1% Pitch (Magenta) Mark 3/4/5 compatible. Pitch range -10% to 10%. For level drilling use only.

15 in. x 1.25 in. 38 cm x 3.125 cm	70 ft 21.3 m	2 C-cell alkaline 20 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$3,850


D4XP: D4X with 0.1% Pitch (Magenta) Mark 3/4/5 compatible. Pitch range -10% to 10%. For level drilling use only.

19 in. x 1.25 in. 48 cm x 3.125 cm	70 ft 21.3 m	4 C-cell alkaline 40 hours awake 400 hours sleep	220°F 104°C	1.85 lb 840 g	$3,850

DC: Cable Transmitter (Green) Mark 3/4 compatible.

15 in. x 1.25 in. 48 cm x 3.125 cm	140 ft 42.7 m	12V to 28V DC cable power	180°F 82°C	1.2 lb 545 g	$3,850

DCP: DC with 0.1% Pitch (Magenta) Mark 3/4 compatible.

15 in. x 1.25 in. 48 cm x 3.125 cm	140 ft 42.7 m	12V to 28V DC cable power	180°F 82°C	1.2 lb 545 g	$4,400

DucTrak™ Series Transmitters

DucTrak™ is designed to track existing non-metal duct to depths greater than 100 feet. It does not send out a roll / pitch signal and is not intended for horizontal directional drilling operations. The DDT/DDTS models are designed for use with the Mark series locators.

Length x Diameter	Depth Range	Battery Type	Temp. Rating	Weight	MSRP*

DDT DucTrak™ Extended Range Transmitter - Mark 3/4/5 compatible.

12 in. x 0.875 in. 30.5 cm x 2.2 cm	100 ft 30.5 m	Type DL 123A 10 hours awake No sleep mode	122°F 50°C	9 oz 260 g	$1,000

DDTS DucTrak™ Transmitter - Mark 3/4/5 compatible.

6 in. x 0.875 in. 15.2 cm x 2.2 cm	50 ft 15.2 m	Type DL 123A 10 hours awake No sleep mode	122°F 50°C	4.5 oz 127 g	$1,000

Eclipse Series Transmitters

Length x Diameter	Depth Range	Battery Type	Temp. Rating	Weight	MSRP*

EDF: Dual Frequency - 0.1% Pitch (Lavender)

15 in. x 1.25 in. 38 cm x 3.125 cm	50 ft 15.2 m 70 ft 21.3 m	2 C-cell alkaline 10 hours awake 100 hours sleep	220°F 104°C	1.4 lb 635 g	$3,800

ETP: Standard Range - 0.1% Pitch (Black)

15 in. x 1.25 in. 38 cm x 3.125 cm	50 ft 15.2 m	2 C-cell alkaline 20 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$3,400

ECP: Cable Transmitter 0.1% Pitch (Black)

19 in. x 1.25 in. 48 cm x 3.125 cm	100 ft 30.5 m	12V to 28V DC Cable Power	180°F 82°C	1.85 lb 840 g	$4,800

Trasmitter Features

DigiTrak transmitters send drill head information such as pitch, roll, depth and down-hole temperature to the locator.

All DigiTrak transmitters can be used with both the MK III and MK IV systems.

DCI Spot-D-Tek IV® locating package

Package includes receiver, remote display and carrying case.

Real-time pitch information even when rotating drill rod
Left/Right remote guidance system
Pitch, roll, depth, probe temperature and battery life graphically displayed on custom backlit LCD
Menu-driven operation speeds training time and improves operator comfort zone
Remote monitor features “Bore-In-Progress” display enabling drill operator to see upcoming utilities and ensures a smooth drill path
Mapping function stores up to 7 independent bores of 2,500 feet per bore

Spot-D-Tek Transmitters

Length x Diameter	Depth Range	Battery Type	Temp. Rating	Weight	MSRP*

CDT (White)

15 in. x 1.25 in. 38 cm x 3.125 cm	45 ft 13.7 m	2 C-cell alkaline 30 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$2,050

CDX (Orange)

15 in. x 1.25 in. 38 cm x 3.125 cm	80 ft 21.3 m	2 C-cell alkaline 20 hours awake 200 hours sleep	220°F 104°C	1.4 lb 635 g	$2,500